How Do You Put Boning In A Corset?

1. To put boning in a corset, first cut the desired length of boning to fit the panel. Be sure to leave some extra length for sewing and overlapping with other pieces. Then, use an awl or point turner to make holes on either side of each piece of boning where it will be sewn into the corset fabric panels. Sew each piece of boning in place by hand using strong thread and needle and zigzag stitches along both sides.

Preparation

In order to successfully install boning in a corset, there are several important preparatory steps one must take. Before starting the process of putting boning into your corset, it is essential that you have all necessary supplies at the ready - specifically, boning material as well as any tools required for cutting or joining. Depending on the type of boning selected, different supplies may be needed; plastic boning will need special cutters while steel boned corsets usually come with pre-bent pieces and additional resources such as rivets may be needed.

Once adequate materials have been acquired for this task, taking measurements is important to ensure optimal installation and fit. Specifically, measuring widths and lengths along each seam line before installing the bones will give an idea about how much space needs to be allocated for them. If possible, checking the internal circumference by using string or tracing paper can help determine if there are any areas where extra support is needed due to weak seams. In addition to this preliminary assessment work up front can also save time when actually putting in the bones later on - allowing them to be fitted easily and quickly without having to adjust size significantly afterwards.

But just as importantly prior research should conducted into types of bone suitable for use in a specific corset. Choosing an option that conforms best with intended purpose (i.E. Waist training or tightlacing) is critical for obtaining desired results; stiffer wires tend to provide more control while lighter options add flexibility without sacrificing structure too much which can work better if comfort levels are paramount.

Material Selection

For those looking to learn how to put boning in a corset, understanding the type of material needed for the project is essential. The two most popular options are plastic and metal, both providing unique benefits that can add structure and support to your corset design.

Plastic boning comes in several shapes and sizes so you can find pieces that fit around curves or straight sections with ease. They're also quite inexpensive compared to metal boning making them ideal for costumes or other uses that don't require serious shaping or waist-cinching ability. Plastic will not hold up as well over time when exposed to body heat and humidity but they provide enough stiffness to keep a garment form fitting without being uncomfortable.

Metal boning is designed specifically for garments like corsets where supportive construction matters most. Steel bones come in many different lengths giving you ultimate control over your final design while allowing you to create strong seams and beading details along the way. While steel is usually more expensive than plastic, it offers much greater flexibility which adds value if you want something long-lasting wear after wear.

Cutting the Boning

Cutting the boning is an important step in creating a corset. The length of each piece of boning must be precisely measured before it can be inserted into the fabric for sewing, ensuring that it fits comfortably and effectively compresses your body. For best results, use boning shears as regular scissors may pinch or distort the metal’s shape when cutting. Boning comes in various sizes ranging from 6-inch to 12-inch lengths; however, you should measure your individual corset against your body first and cut the pieces accordingly. You will need 2 side pieces that are slightly longer than your corset sides, as well as shorter sections for underarm areas and support panels. When measuring these sections, remember to leave enough slack for ease of movement while still providing compression to flatter your figure without compromising comfort levels.

To begin cutting the boning properly, hold one end firmly with pliers while snipping along its edge with shears so that sharp edges are less likely to catch on fabric after insertion. It is also a good idea to smooth out any rough edges with a file afterwards; this helps make them more comfortable against skin once you put on your corset later on. Once all pieces have been cut at correct lengths and smoothed out where necessary, they can then be moved onto inserting into their respective positions within the garment fabric ready for sewing together by hand or machine. If done correctly this method will ensure a perfect fit every time.

Shaping the Corset

Properly shaping the corset is an essential step in putting boning into a corset. Shaping helps create the desired silhouette and should be done prior to adding any of the boning. The size, shape, and type of boning used will all contribute to how you go about forming your corset.

In terms of tools needed for the task, the most basic items are: fabric scissors, tailor's chalk or pen markers, cotton twill tape measurer for measuring sizes needed for cutting and inserting boning pieces. Other items that may come in handy include pins to mark specific points on the fabric as well as clips to hold parts in place while they are being sewn together. Of course having a sewing machine and matching thread colors available makes this whole process much faster.

To begin shaping the corset, carefully lay out pattern pieces onto your chosen fabric with right sides facing up. Once marked out it’s time to start cutting - making sure each cut piece is precise and exact so that when put back together everything lines up correctly. After cutting all pieces sew them together using a straight stitch leaving an allowance on one side where you will insert your boning pieces later on down the road. Then turn your garment inside out so right sides are now facing each other and press seams flat before starting to add bones in whichever way works best for you - whether that means overlapping them horizontally or vertically will depend on what look you want for your finished product.

Sewing in the Boning

Sewing in the boning is an essential part of putting together a corset. The type of boning you choose will largely depend on your garment style and fabric selection, as well as how supportive you want the corset to be. Bones are inserted into pre-made channels or casings on the top and bottom of the corset panels; these casings hold them securely in place while supporting your body’s curves.

There are two main types of bones used for making corsets: metal spiral and flat steels. Both provide strength and durability that help form a sturdy structure for lasting shape. Metal spirals can flex more than flat steels so they hug your curves better while providing support where it's needed most–in the waist, ribs, and back. Flat steels are usually preferred if you're looking for firm control or an upright posture like some Victorian-style garments require. The number of bones depends on what type of fit you're going for; fewer bones are used to create moderate support, but additional ones can add greater compression which makes them great for extremely curvy figures or those who need extra support due to medical reasons.

Adding boning to a corset involves skillfully hand-stitching each piece onto the garment at regular intervals before carefully closing up any raw edges with machine stitching or French seams. It takes patience and attention to detail, but once complete it offers reliable construction and creates a flattering silhouette that won't stretch out over time like some fabrics do with wear and washing.

Secure Fastening

In order to ensure your corset stays in place, it is imperative to have a secure fastening. This means using boning correctly and to the best of its ability. Boning can be made from a variety of materials such as steel, whalebone, and plastic. All three materials are known for their strength and longevity; however, some may find certain types uncomfortable or stiffer than others. Consider which material you would prefer based on comfort preferences before purchasing boning for your garment.

It is important to note that when attaching the boning into the corset fabric, there are two methods: hand-sewing and machine-stitching. Hand-sewing ensures an extra secure fit as it involves small stitches around each length of boning whereas machine-stitching only takes one pass along the corset to attach all lengths at once but does not guarantee complete security since thread tension differs throughout different areas of the piece. It is up to personal preference how you choose to fasten your boning; however, it must always be properly secured in order for your corset design to work effectively.

Bear in mind that most shops will offer professional installation services which will guarantee accuracy and allow for customization of each individual’s figure. However this service may require additional fees so weigh out whether it would be more beneficial in terms of time/costs compared with completing it yourself at home.

Want to learn more? See: How long does it take for corset training to work?

More articles.